|
Coming Soon!
Engineering
Passion Brings Cellpro 10s Charger to Life.
FMA
is proud to announce the most intensely engineered product we have ever designed
for the R/C community.
Say
hello to the new Cellpro 10s Charger.
FMA Direct has
combined the features of Full Power Balancing with new capabilities never before
seen in a LiPo charger. Experience, passion, and unprecedented design features
are wrapped up in this unique product from FMA Direct.
Order yours today. FMA is now taking orders for the new Cellpro 10s Charger.
Delivery in Late January, 2008.
Part
Number: LC10S10ADC
Retail Price: $189.95
| Up to 10A
Max Charge Current |
| Continuous Power 300W
(estimate) |
| Displays Individual
Cell Internal Resistance to 0.1 mohm Resolution (Battery Quality Indicator,
a feature exclusive to the Cellpro 10s charger) |
| Charges Lithium Polymer
or A123 Cells (variable charge rates for both LiPo and A123 cells). Charges
1 Pack of 1s-10s or 2 Packs of 1s-5s Simultaneously |
| Includes Start/Stop
Button |
| Backlit Liquid Crystal
Display |
| Supports 2-way P.C.
Interface |
| Drive the Charger from
the P.C. |
| Access Advanced Features
from the P.C. (Setup Custom Presets, Adjust Speaker Volume, LCD Contrast,
and More) |
| Internet Upgradability
(IU) Feature -- No need to send the charger to the factory for firmware
upgrades again. Do it over the internet. |
| FMA’s Cellpro
Node Connector is a key part of the system. It enables the charger to monitor
individual cells and independently charge
each cell to its optimum level. |
| The Cellpro 10s charger
may be used to charge any brand of Lithium pack using either the Cellpro
adapters or pigtails. The charger includes two 5s output connectors and
includes two simple 5s-to-4s adapters. This enables automatic support for
any current Cellpro 2s-4s battery sold in the past. These extra accessories
also enable you to connect any of the existing Cellpro 4s adapters for other
brand batteries with the Cellpro 10s charger. |
| Using the Cellpro 10s
Charge Control Software, the charger can be set to work with virtually any
good, regulated power supply, even if the power supply is not designed for
high power. By entering current capability; e.g., 1-25A, the charger will
automatically adjust the maximum charge current to protect the programmed
power supply. There is also a simple procedure that can be performed at
the field to reset the input power supply to the factory default (25A) if
a PC is not available. You might need to do this, if for example, you use
a small AC power supply at home, but you want full charge current from your
car battery at the field. This powerful feature allows you to decide how
much money to spend on your power supply. |
In addition to the unique features listed above,
the new Cellpro 10S charger has all the features found in the FMA Cellpro
4S charger:
|
| Faster Auto Charge
rates (1.0C, 2.0C, and 3.0C), permit safe charging Lipo batteries at up
to a 3C charge rate. This is only possible with FMA Direct cell-balancing
technology which incorporates integrated, highly-accurate cell monitoring
and balancing during charge. |
| Unprecedented Accuracy |
| Fuel Gauge Readout |
| Simple, easy to use
one button user interface |
| Unparalleled Safety |
| Self Diagnostics |
| Storage Charge Mode |
| Safety Charge Mode |
| Support for long battery
extensions |
| Cold Weather Mode |
Power Supplies
for Your
Cellpro Chargers
FMA Direct tested numerous
units searching for the best combination of power, reliability and value in
AC/DC power supplies for our Cellpro Chargers. Our work has led us to offer
the following two units through the Revolectrix Brand.
| ................................................................................................... |
................................................................ |
 |
12 Volt, 5 Amp
version is perfect for
the Cellpro 4S Charger.
Part Number
PS12V5A-BP
$29.95
Now Taking Orders
Available February
15, 2008
click
here to order |
| ................................................................................................... |
................................................................ |
 |
13.8 Volt, 28
Amp version is perfect for
the Cellpro 10S Charger or powering multiple
Cellpro 4S Chargers.
Part Number
PS13.8V28A-BP
$129.95
Now Taking Orders
Available February
8, 2008
click
here to order |
|
