| |
FMA Direct : Node Connector Compatibility
| |
These
Cellpro adapters provide interconnectivity between FMA Direct’s
Cellpro 4s or Cellpro 10s cell balancing chargers and many currently-available
lithium polymer battery packs. The Cellpro 4s adapters will interconnect
2s to 4s battery packs. The Cellpro 10S adapters will interconnect
2s to 6s battery packs. The Cellpro 4s adapters listed on this
page may be used with the Cellpro 10s charger by connecting to
the 5s-to-4s adapters that come standard with every Cellpro 10s
charger. The Cellpro 10s adapters listed on this page will not
interconnect with the Cellpro 4s charger.
Currently, FMA manufactures adapters that will interconnect up
to 6s battery packs. In order to charge packs larger than 6s using
the Cellpro 10S charger, you are required to adapt FMA’s
Cellpro balancing tap connectors to your packs. See the attached
link for instructions on wiring 2s to 10s packs using FMA’s
balancing tap pigtails, PN’s CPBP7 and CPBP6P-10, http://www.fmadirect.com/support_docs/item_1254.pdf
Alternately, on battery packs larger than 6s that implement the
wiring scheme used on Thunder Power packs, you may use two adapters
(PN:CP10S-TP/PQ6S) from FMA to charge one pack. One adapter must
be plugged into channel one on the Cellpro 10s charger, while
the second adapter must be plugged into channel two. Each of the
two balancing tap connectors on the pack will then plug into the
separate FMA adapters based on the number of series cells in the
pack. Example: You have a 10s Thunder Power pack wired as (2)
5s packs in series. The balancing tap connector from the first
5s pack will plug into the 5s port on the adapter and channel
one on the CP10s. The balancing tap from the second 5s series
pack will plug into the 5s port on the second adapter on channel
two of the CP10s. In this example, the second pigtail coming off
of each of the CP10S-TP/PQ6S adapters does not get connected to
anything. This second pigtail, labeled “Connect for 6s Only”
is required only when a single, 6s pack is connected to the Cellpro
10s charger.
|
4S
CHARGER ADAPTERS
Charges
2S to 4S packs |
10S
CHARGER ADAPTERS
Charges
2S to 6S packs |
 |
 |
ADAPTER
NAME EQUIVALENTS |
FMA
CALLS IT |
MANUFACTURER
CALLS IT |
|
JST
XH
JST
EH and/or HR
Korean
brand Yeonho SMH250
Molex
Sherloc II or equivalent
|
|
| |
CP-GP/KO
PACKS SUPPORTED
3E,
Air Thunder, Align, BatteryHobby, CommonSense RC (v1), CommonSense
RC (v2), DN Power, DualSky, Dynam, E-flite, Energy EC, Electric
Power, ElectriFly, Esky, Fully Max, Graupner, Grayson Power,
HexTronik, Hobby City, Imax, Kokam, Kong Thunder, HiModel,
Mega Power, NEU, ParkZone, RadicalRC, Robbe, X-Caliber, Tenergy,
Turborix, VampowerVenom, Wow RC, Zippy-R |
 |
CP4S-TP/PQ4S
PACKS SUPPORTED
Apache,
Apex,
Danlions, E-Tec, Flight Power/EVO, Hyperion, Impulse, Kong
Power, Max Amps, MPX, PolyQuest, Poly RC, ThunderPower, True
RC, Vislero, XCite |
|
 |
CP10S-TP/PQ6S
PACKS SUPPORTED
Apache,
Apex,
Danlions, E-Tec, Flight Power/EVO, Hyperion, Impulse, Kong
Power, Max Amps, MPX, PolyQuest, Poly RC, ThunderPower, True
RC, Vislero, XCite
|
 |
CP10S-GP/KO6S
PACKS SUPPORTED
3E,
Air Thunder, Align, BatteryHobby, CommonSense RC (v1), CommonSense
RC (v2), DN Power, DualSky, Dynam, E-flite, Energy EC, Electric
Power, ElectriFly, Esky, Fully Max, Graupner, Grayson Power,
HexTronik, Hobby City, Imax, Kokam, Kong Thunder, HiModel,
Mega Power, NEU, ParkZone, RadicalRC, Robbe, X-Caliber, Tenergy,
Turborix, VampowerVenom, Wow RC, Zippy-R |
|
|
