| 3200mAh
Cellpro Revolectrix LiPo Cell
The
discharge rate is set by the following criteria: The maximum continuous
discharge rate that at least 80% of the 1C capacity is reached and the
pack remains at a safe temperature. Many factors affect pack operating
temperature.
Temperature indicators are available from FMA Direct to help you determine
whether a pack is operating in its optimum temperature range. The following
illustrates how one might use the temperature stickers. Typically, you'll
place 140 degrees F and 160
degrees F indicators on the outside of each Cellpro Pack. 1. Fly
moderately during the pack's first flights. 2. After each landing, examine
the 140 degrees F
indicator. If its center is black, the temperature exceeded 140
degrees F, so the pack is not able to supply sufficient power for
your propulsion configuration. Install a different propeller or a larger
capacity battery pack. Remove the 140
degrees F indicator and place a new one on the pack. 3. Fly again,
then repeat step 2. When the 140
degrees F indicator's center remains white, and you are flying
your normal style, the pack is matched to the aircraft. Note: If the 160
degrees F indicator turns black, the pack is operating much too
hot. Replace the pack with a larger capacity one.
|
