Untitled Document
Engineering
Passion Brings Cellpro 10s Charger to Life.
FMA
is proud to announce the most intensely engineered product we have ever
designed for the R/C community.
Say
hello to the new Cellpro 10s Charger.
FMA Direct
has combined the features of Full Power Balancing with new capabilities
never before seen in a LiPo charger. Experience, passion, and unprecedented
design features are wrapped up in this unique product from FMA Direct.
Part
Number: LC10S10ADC
Retail Price: $189.95
Up
to 10A Max Charge Current |
Continuous
Power 300W (estimate) |
Displays
Individual Cell Internal Resistance to 0.1 mohm Resolution (Battery
Quality Indicator, a feature exclusive to the Cellpro 10s charger) |
Charges
Lithium Polymer or A123 Cells (variable charge rates for both LiPo
and A123 cells). Charges 1 Pack of 1s-10s or 2 Packs of 1s-5s Simultaneously |
Includes
Start/Stop Button |
Backlit
Liquid Crystal Display |
Supports
2-way P.C. Interface |
Drive
the Charger from the P.C. |
Access
Advanced Features from the P.C. (Setup Custom Presets, Adjust Speaker
Volume, LCD Contrast, and More) |
Internet
Upgradability (IU) Feature -- No need to send the charger to the factory
for firmware upgrades again. Do it over the internet. |
FMA’s
Cellpro Node Connector is a key part of the system. It enables the
charger to monitor individual cells and independently charge
each cell to its optimum level. |
The
Cellpro 10s charger may be used to charge any brand of Lithium pack
using either the Cellpro adapters or pigtails. The charger includes
two 5s output connectors and includes two simple 5s-to-4s adapters.
This enables automatic support for any current Cellpro 2s-4s battery
sold in the past. These extra accessories also enable you to connect
any of the existing Cellpro 4s adapters for other brand batteries
with the Cellpro 10s charger. |
Using
the Cellpro 10s Charge Control Software, the charger can be set to
work with virtually any good, regulated power supply, even if the
power supply is not designed for high power. By entering current capability;
e.g., 1-25A, the charger will automatically adjust the maximum charge
current to protect the programmed power supply. There is also a simple
procedure that can be performed at the field to reset the input power
supply to the factory default (25A) if a PC is not available. You
might need to do this, if for example, you use a small AC power supply
at home, but you want full charge current from your car battery at
the field. This powerful feature allows you to decide how much money
to spend on your power supply. |
In addition to the unique features listed above,
the new Cellpro 10S charger has all the features found in the FMA
Cellpro 4S charger:
|
Faster
Auto Charge rates (1.0C, 2.0C, and 3.0C), permit safe charging Lipo
batteries at up to a 3C charge rate. This is only possible with FMA
Direct cell-balancing technology which incorporates integrated, highly-accurate
cell monitoring and balancing during charge. |
Unprecedented
Accuracy |
Fuel
Gauge Readout |
Simple,
easy to use one button user interface |
Unparalleled
Safety |
Self
Diagnostics |
Storage
Charge Mode |
Safety
Charge Mode |
Support
for long battery extensions |
Cold
Weather Mode |
|
