Cellpro Revolectrix 10s, 10 Amp Cell Balancing Charger
Part Number: LC10S10ADC
The Cellpro charger is designed to charge Cellpro and Cellpro Revolectrix battery packs directly. FMA currently sells adapters separately to interface with various manufacturer's battery packs up to 4s configurations. These adapters are used with the Cellpro 4s charger and may be used with the new 10s charger for packs up to 4s by connecting through the two 5S to 4S adapters that come standard with every Cellpro 10S charger. Click Here to see the FMA node compatibility page. FMA also offers adapters for other manufacturer's 2S to 6S packs for use with the Cellpro 10s. Two adapters are required to charge two packs using the Cellpro 10S charger. Users of the 10s charger may also adapt to larger battery packs (over 6S) by using the 6 pin Cellpro balancing connectors (CPBP6P-10) or a combinatioin of the 5 pin Cellpro balancing connector (CPBP7) and the CPBP6P-10. All current and future Cellpro Revolectrix branded battery packs will adhere to the following conventions for the above connectors. We recommend that customers adhere to the standards we have defined when re-wiring battery packs using the Cellpro battery pigtails. Click Here for a pictorial diagram which illustrates wiring convention for all Cellpro battery packs. The full document corresponds to the following summary:
No. Cells Requires
1s-4s 1 CPBP7
5s 1 CPBP6P-10
6s-9s 1 CPBP7 and 1 CPBP6P-10
10s 2 CPBP6P-10
In addition to all the great features found in the Cellpro 4s charger, the new 10 AMP version is designed from the ground up for super-safe, super-fast charging! With support for up to 10A max charge rates and new faster Auto Charge rates (1.0C, 2.0C, and 3.0C), the new version is capable of safely charging multiple battery packs at up to a 3C charge rate. This is only possible with FMA Direct cell-balancing technology which incorporates integrated, highly-accurate cell monitoring and balancing during charge. FMA Direct recommends 3C max charge rates for good quality, high discharge rate batteries of 12C or higher. To view the manual for the Cellpro 10s Charger, click here. To download and install the FREE Cellpro 10s Charge Control Software, click here. Please note, for best results, the Charge Control Software requires Microsoft Windows 2000 or higher. Currently, the software does support the Vista x32 bit operating system. It will also support Vista x64 bit if you update the .NET 3.5 installation to the latest SP from the Microsoft site.
Battery technology continues to evolve at a fast pace. In an attempt to update our advertisements so that potential purchasers have complete and current information about all posted features of this charger, we are providing additional information here based on feedback from existing customers.
Price: $169.95
In addition to all the great features found in the Cellpro 4s charger, the new 10 AMP version is designed from the ground up for super-safe, super-fast charging! With support for up to 10A max charge rates and new faster Auto Charge rates (1.0C, 2.0C, and 3.0C), the new version is capable of safely charging multiple battery packs at up to a 3C charge rate. This is only possible with FMA Direct cell-balancing technology which incorporates integrated, highly-accurate cell monitoring and balancing during charge.
Add this many to my cart:
IN STOCK
| 
